This website uses cookies. By using the site you are agreeing to our Privacy Policy.

Enter a search term and click .

Automatically vary settings over a series of pictures. Bracketing options can be displayed by pressing the [DRIVE] button.


[AE BKT]

Press the selector left or right to highlight a bracketing amount. Each time the shutter button is pressed, the camera will take three shots: one using the metered value for exposure, the second overexposed by the selected amount, and the third underexposed by the same amount.

The camera may not be able to use the selected bracketing increment if the amount of over- or under- exposure exceeds the limits of the exposure metering system.

[ISO BKT]

Press the selector left or right to highlight a bracketing amount. Each time the shutter-release button is pressed, the camera will take a picture at the current sensitivity and process it to create two additional copies, one with the sensitivity raised and the other with the sensitivity lowered by the selected amount.

This option can not be used if [RAW] is selected for [IMAGE QUALITY].

[FILM SIMULATION BKT]

Each time the shutter is released, the camera takes one shot and processes it to create copies with the film simulation settings selected for [FILM SIMULATION BKT] in the shooting menu.

This option can not be used if [RAW] is selected for [IMAGE QUALITY].


[WHITE BALANCE BKT]

Press the selector left or right to highlight a bracketing amount. Each time the shutter button is pressed, the camera takes three shots: one at the current white balanced setting, one with fine-tuning increased by the selected amount, and another with fine-tuning decreased by the selected amount.

This option can not be used if [RAW] is selected for [IMAGE QUALITY].

[DYNAMIC RANGE BKT]

Each time the shutter button is pressed, the camera takes three shots at different dynamic range settings: 100% for the first, 200% for the second, and 400% for the third.

Sensitivity is restricted to a minimum of ISO 800; the sensitivity previously in effect is restored when bracketing ends.

This option can not be used if [RAW] is selected for [IMAGE QUALITY].