TIME CODE SETTING (Movie Recording)
Adjust time code (hour, minute, second, and frame number) display settings for movie recording.
To display focus settings, press MENU/OK in the shooting display and select the Q (TIME CODE SETTING) tab.
The options available vary with the shooting mode selected.
TIME CODE DISPLAY
Select ON to display time codes during movie recording and playback.
START TIME SETTING
Choose the time code starting time.
|MANUAL INPUT||Highlight this option and press the selector right to choose a start time manually.|
|CURRENT TIME||Set the start time to the current time.|
|RESET||Set the start time to 00:00:00.|
COUNT UP SETTING
Choose whether time is clocked continuously or only during movie recording.
|REC RUN||Time is clocked only during movie recording.|
|FREE RUN||Time is clocked continuously.|
At frame rates of 59.94P, and 29.97P, a discrepancy will gradually develop between the time code (measured in seconds) and the actual recording time (measured in fractions of a second). Choose whether the camera drops frames as necessary to match the recording time to the time code.
|ON||The camera drops frames as necessary to maintain a strict match between the time code and the actual recording time.|
|OFF||Frames are not dropped.|
The time code display varies with the option selected.
Selecting a frame rate of 23.98P disables frame drop.
HDMI TIME CODE OUTPUT
Choose whether time codes are output to HDMI devices.