The following optional accessories are available from Fujifilm. For the latest information on the accessories available in your region, check with your local Fujifilm representative or visit “Digital Cameras”.
Rechargeable Li-ion batteries
NP‑W126S: Additional high-capacity NP‑W126S rechargeable batteries can be purchased as required.
BC‑W126: Replacement battery chargers can be purchased as required. At +20 °C/+68 °F, the BC-W126 charges an NP‑W126S in about 150 minutes.
AC power adapters
AC‑9V (requires CP‑W126 DC coupler): Use this 100–240 V, 50/60 Hz AC power adapter for extended shooting and playback or when copying pictures to a computer.
CP‑W126: Connect the AC‑9V to the camera.
RR‑90: Use to reduce camera shake or keep the shutter open during a time exposure.
MIC‑ST1: An external microphone for movie recording.
XF‑series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
XC‑series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
Shoe-mounted flash units
EF‑X500: This clip-on flash unit has a Guide Number of 50/164 (ISO 100, m/ft.) and is powered by four AA batteries or an optional EF‑BP1 battery pack. The flash head can be rotated 90° up, 10° down, 135° left, or 180° right for bounce lighting.
EF‑42: This clip-on flash unit (powered by four AA batteries) has a Guide Number of 42/137 (ISO 100, m/ft.) and supports manual and TTL flash control and auto power zoom in the range 24–105 mm (35 mm format equivalent). The flash head can be rotated 90° up, 180° left, or 120° right for bounce lighting.
EF‑X20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.). Powered by two AAA batteries, this light, compact unit features a dial for adjusting TTL flash compensation or manual flash output.
EF‑20: This clip-on flash unit (powered by two AA batteries) has a Guide Number of 20/65 (ISO 100, m/ft.) and supports TTL flash control (manual flash control is not supported). The flash head can be rotated upwards 90° for bounce lighting.
GB‑001: Offers an enhanced grip.
Macro extension tubes
MCEX‑11/16: Attach between the camera and the lens to shoot at high reproduction ratios.
XF1.4X TC WR: Increases the focal length of the compatible lenses by about 1.4×.
XF2X TC WR: Increases the focal length of the compatible lenses by about 2.0×.
FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses.
BCP‑001: Cover the camera lens mount when no lens is attached.
instax SHARE printers
SP‑1/SP‑2/SP-3: Connect via wireless LAN to print pictures on instax film.