This website uses cookies. By using the site you are agreeing to our Privacy Policy.

FUJIFILM

Using FUJIFILM X Webcam

Installing FUJIFILM X Webcam

Double-click the “.exe” file you downloaded to launch the installer. Follow the on-screen instructions to complete the installation.

Before installing FUJIFILM X Webcam, exit any other applications that may be running.

Installing FUJIFILM X Webcam requires Windows administrator privileges.

The computer must be restarted once installation is complete.

Before uninstalling FUJIFILM X Webcam, exit all web conference applications.

  1. Double-click the “.exe” file you downloaded.

  2. A welcome dialog will be displayed; click Next.

  3. After reading the license agreement, select I Agree and click Next to proceed.

  4. Click Next to start installation.

  5. The installer will request permission to make changes to the computer. Select Yes to permit installation.

  6. Wait for installation to complete.

  7. Click Close to exit the installer.

  8. A dialog is displayed when installation is complete; click Yes to restart the computer.

Double-click “XWebcamIns100.pkg” to launch the installer. Follow the on-screen instructions to complete installation.

Before installing FUJIFILM X Webcam, exit any other applications that may be running.

Installing FUJIFILM X Webcam requires Mac administrator privileges.

The computer must be restarted once installation is complete.

Before uninstalling FUJIFILM X Webcam, exit all web conference applications.

  1. Double-click “XWebcamIns100.pkg”.

  2. When the Welcome screen is displayed, click Continue.

  3. Click Continue after reading the Software License Agreement.

  4. Click Agree to proceed with installation.

  5. The installer is now ready to start; click Install.

  6. Click Continue Installation to proceed with installation.

  7. You will be prompted to permit installation of new software. Enter your password or use Touch ID to accept and begin installation.

  8. Click Restart to restart your computer when installation is complete.

When uninstalling the software, delete the following file:

MacintoshHD/Library/CoreMediaIO/Plug-Ins/DAL/FUJIFILM X Webcam.plugin

Configuring and Connecting the Camera and Computer

Configuring the Camera

Some camera settings cannot be adjusted while the camera is connected to a computer. Adjust camera settings before proceeding.

Any adjustments made prior to connection will remain in effect once the camera is connected.

Item (required) Setting
Mode (still photography/movie recording) Still photography
STILL/MOVIE mode dial (X-T4) STILL
Drive mode S (single frame)
CONNECTION SETTING > PC CONNECTION MODE in the setup menus
(X-H1, X-Pro3, X-Pro2 Ver. 4.00 and later, X-T3 Ver. 1.00—3.01, X-T2 Ver. 3.00 and later)
USB TETHER SHOOTING AUTO
CONNECTION SETTING > CONNECTION MODE in the setup menus
(X-T4, X-T3 Ver. 3.10 and later)
USB TETHER SHOOTING AUTO
CONNECTION SETTING > PC SHOOT MODE in the setup menus
(X-T2 Ver. 1.00—2.12, X-Pro2 Ver. 1.00—3.12)
USB AUTO
Recommended items (simple webcam) Setting
AF/MF SETTING > PRE-AF ON
AF/MF SETTING > FACE/EYE DETECTION SETTING FACE DETECTION ON
CONNECTION SETTING > USB POWER SUPPLY SETTING in the setup menus
(X-T4, X-Pro3)
ON
Exposure settings Full auto
(auto shutter speed, auto aperture, and auto ISO sensitivity)
Focus mode selector AF-S

For consistent exposure, we recommend that you choose manual exposure mode and select PREVIEW EXP./WB for SCREEN SETTING > PREVIEW EXP./WB IN MANUAL MODE in the setup menus.

After the web conference finishes, we recommend to switch the PC CONNECTION MODE in the setup menus to USB CARD READER or options other than the USB TETHER SHOOTING. When using the camera in USB TETHER SHOOTING while connecting the camera with a USB cable to an output other than computers, the camera might not activate properly.

Connecting the Camera and Computer

Connect the camera and computer using a USB cable.

Note: The illustration shows the X-T4.

Exit X Acquire, CaptureOne, the Lightroom plugin, HS-V5, and X RAW studio when using FUJIFILM X Webcam.

Configuring the Computer

Launch a web conference application on your computer.

Select FUJIFILM X Webcam as your camera in the application’s audio/video settings.

For more information, see the documentation for the web conference application.

Some camera settings cannot be adjusted while the camera is connected to a computer. Before adjusting camera settings, turn the camera off and disconnect the USB cable.