Table of Contents »

• The Shooting Menus
• The Shooting Menus (IMAGE QUALITY SETTING)

Enter a search term and click .

Adjust image quality settings.

---

IMAGE SIZE

Choose the size and aspect ratio at which still pictures are recorded.

IMAGE QUALITY

Choose a file format and compression ratio. Select SUPER FINE (minimum compression), FINE (low compression), or NORMAL (high compression) to record JPEG images, RAW to record RAW images, or SUPER FINE+RAW, FINE+RAW, or NORMAL+RAW to record both JPEG and RAW images. With JPEG images, the lower the compression ratio, the higher the quality of the image, while higher compression ratios allow more images to be stored in the same amount of memory.

RAW RECORDING

Choose whether to compress RAW images.

Option	Description
UNCOMPRESSED	RAW images are not compressed.
LOSSLESS COMPRESSED	RAW images are compressed using a reversible algorithm that reduces file size with no loss of image data. The images can be viewed in RAW FILE CONVERTER EX 2.0 or other software that supports “lossless” RAW compression (Viewing RAW Files).

FILM SIMULATION

Simulate the effects of different kinds of film, including black-and-white (with or without color filters). Choose a palette according to your subject and creative intent.

Option	Description
PROVIA/STANDARD	Standard color reproduction. Suited to a wide range of subjects, from portraits to landscapes.
Velvia/VIVID	A high-contrast palette of saturated colors, suited to nature photos.
ASTIA/SOFT	Enhances the range of hues available for skin tones in portraits while preserving the bright blues of daylight skies. Recommended for outdoor portrait photography.
CLASSIC CHROME	Soft color and enhanced shadow contrast for a calm look.
PRO Neg. Hi	Offers slightly more contrast than PRO Neg. Std. Recommended for outdoor portrait photography.
PRO Neg. Std	A soft-toned palette. The range of hues available for skin tones is enhanced, making this a good choice for studio portrait photography.
ACROS *	Take black-and-white photos with rich gradation and outstanding sharpness.
MONOCHROME *	Take pictures in standard black and white.
SEPIA	Take pictures in sepia.

* Available with yellow (Ye), red (R), and green (G) filters, which deepen shades of gray corresponding to hues complementary to the selected color. The yellow (Ye) filter deepens purples and blues and the red (R) filter blues and greens. The green (G) filter deepens reds and browns, including skin tones, making it a good choice for portraits.

GRAIN EFFECT

Add a film grain effect. Select an amount (STRONG or WEAK) or choose OFF to turn film grain off.

Options
STRONG	WEAK	OFF

COLOR CHROME EFFECT

Deepen colors in shadows. Select an amount (STRONG or WEAK) or choose OFF to turn the effect off.

Options
STRONG	WEAK	OFF

DYNAMIC RANGE

Control contrast. Choose lower values to increase contrast when shooting indoors or under overcast skies, higher values to reduce loss of detail in highlights and shadows when photographing high-contrast scenes. Higher values are recommended for scenes that include both sunlight and deep shade, for such high-contrast subjects as sunlight on water, brightly-lit autumn leaves, and portraits taken against a blue sky, and for white objects or people wearing white; note, however, that mottling may appear in pictures taken at higher values.

Options
AUTO	100%	200%	400%

WHITE BALANCE

For natural colors, choose a white balance option that matches the light source.

Option	Description
AUTO	White balance is adjusted automatically.
//	Measure a value for white balance.
	Choose a color temperature.
	For subjects in direct sunlight.
	For subjects in the shade.
	Use under “daylight” fluorescent lights.
	Use under “warm white” fluorescent lights.
	Use under “cool white” fluorescent lights.
	Use under incandescent lighting.
	Reduces the blue cast typically associated with underwater lighting.

Fine-Tuning White Balance

Custom White Balance

If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value.

If “UNDER” is displayed, raise exposure compensation and try again.

If “OVER” is displayed, lower exposure compensation and try again.

: Color Temperature

HIGHLIGHT TONE

Adjust the appearance of highlights. Choose from seven options between +4 and −2.

SHADOW TONE

Adjust the appearance of shadows. Choose from seven options between +4 and −2.

COLOR

Adjust color density. Choose from nine options between +4 and −4.

SHARPNESS

Sharpen or soften outlines. Choose from nine options between +4 and −4.

NOISE REDUCTION

Reduce noise in pictures taken at high sensitivities. Choose from nine options between +4 and −4.

LONG EXPOSURE NR

Select ON to reduce mottling in long time-exposures.

LENS MODULATION OPTIMIZER

Select ON to improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens.

COLOR SPACE

Choose the gamut of colors available for color reproduction.

Option	Description
sRGB	Recommended in most situations.
Adobe RGB	For commercial printing.

PIXEL MAPPING

Use this option if you notice bright spots in your pictures.

1. Press MENU/OK in the shooting display and select the IMAGE QUALITY SETTING tab.

2. Highlight PIXEL MAPPING and press MENU/OK to perform pixel mapping. Processing may take a few seconds.

SELECT CUSTOM SETTING

Recall settings saved with EDIT/SAVE CUSTOM SETTING. Settings can be recalled from any of the seven custom settings banks.

EDIT/SAVE CUSTOM SETTING

Save up to 7 sets of custom camera settings for commonly-encountered situations. Saved settings can be recalled using IMAGE QUALITY SETTING > SELECT CUSTOM SETTING.

1. Press MENU/OK in shooting mode to display the shooting menu. Select the IMAGE QUALITY SETTING tab, then highlight EDIT/SAVE CUSTOM SETTING and press MENU/OK.

2. Highlight a custom settings bank and press MENU/OK to select.

   

3. Adjust the following as desired:

   • DYNAMIC RANGE
   • FILM SIMULATION
   • GRAIN EFFECT
   • COLOR CHROME EFFECT
   • WHITE BALANCE
   • HIGHLIGHT TONE
   • SHADOW TONE
   • COLOR
   • SHARPNESS
   • NOISE REDUCTION

   

4. Press DISP/BACK. A confirmation dialog will be displayed; highlight OK and press MENU/OK.