Enter a search term and click .

Assign a role to the function buttons for quick access to the selected feature.


The functions assigned to T-Fn1 through T-Fn4 can be accessed by flicking the monitor.

The default assignments are:

Fn1 button
Sensitivity
Fn2 button
Front command dial switch
Fn3 button
Exposure lock
Fn4 button
Focus lock
Fn5 button
AF mode
Drive button
Drive button
T-Fn1 (flick up)
Histogram
T-Fn2 (flick left)
Film simulation
T-Fn3 (flick right)
White balance
T-Fn4 (flick down)
Electronic level
Center of rear command dial
Focus check

Assigning Roles to the Function Buttons

To assign roles to the buttons:

  1. Press and hold the DISP/BACK button until a control selection menu is displayed.

  2. Highlight a control and press MENU/OK.

  3. Highlight the desired role and press MENU/OK to assign it to the selected control. Choose from:

    IMAGE SIZE

    IMAGE QUALITY

    RAW

    FILM SIMULATION

    GRAIN EFFECT

    COLOR CHROME EFFECT

    DYNAMIC RANGE

    WHITE BALANCE

    SELECT CUSTOM SETTING

    FOCUS AREA

    FOCUS CHECK

    AF MODE

    RAPID AF

    FACE/EYE DETECTION SETTING

    DRIVE BUTTON

    SELF-TIMER

    AE BKT SETTING

    FOCUS BKT SETTING

    PHOTOMETRY

    SHUTTER TYPE

    FLICKER REDUCTION

    ISO

    35mm FORMAT MODE

    WIRELESS COMMUNICATION

    FLASH FUNCTION SETTING

    TTL-LOCK

    MODELING FLASH

    MIC LEVEL ADJUSTMENT

    PREVIEW DEPTH OF FIELD

    PREVIEW EXP./WB IN MANUAL MODE

    NATURAL LIVE VIEW

    HISTOGRAM

    ELECTRONIC LEVEL

    LARGE INDICATORS MODE

    FRONT COMMAND DIAL SWITCH

    AE LOCK ONLY

    AF LOCK ONLY

    AE/AF LOCK

    AF-ON

    LOCK SETTING

    AUTO IMAGE TRANSFER

    SELECT PAIRING DESTINATION

    Bluetooth ON/OFF

    PLAYBACK

    NONE (control disabled)

AE LOCK ONLY, AF LOCK ONLY, AE/AF LOCK, and AF-ON cannot be assigned to the touch function buttons (T-Fn1 through T-Fn4).

Button assignments can also be selected using DBUTTON/DIAL SETTING > FUNCTION (Fn) SETTING.

AF‑ON

If AF‑ON is selected, you can press the control instead of keeping the shutter button pressed halfway.

MODELING FLASH

If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash).

TTL-LOCK

If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for FFLASH SETTING > TTL-LOCK MODE (aTTL-LOCK MODE).