Enter a search term and click .

Access options for camera controls.


To access control options, press MENU/OK, select the D (SET UP) tab, and choose BUTTON/DIAL SETTING.

FOCUS LEVER SETTING

Choose the functions performed by the focus stick (focus lever).

Option Description
LOCK (OFF) The focus stick cannot be used during shooting.
PUSH n TO UNLOCK Press the stick to view the focus-point display and tilt the stick to select a focus point.
ON Tilt the stick to view the focus-point display and select a focus point.

EDIT/SAVE QUICK MENU

Choose the items displayed in the quick menu.

  1. Select DBUTTON/DIAL SETTING > EDIT/SAVE QUICK MENU in the D (SET UP) tab.

  2. The current quick menu will be displayed; use the focus stick (focus lever) to highlight the item you wish to change and press MENU/OK.

  3. Highlight any of the following options and press MENU/OK to assign it to the selected position.

    IMAGE SIZE

    IMAGE QUALITY

    FILM SIMULATION *

    B & W ADJ.ab(Warm/Cool) *

    GRAIN EFFECT *

    COLOR CHROME EFFECT *

    COLOR CHROME FX BLUE *

    SMOOTH SKIN EFFECT *

    DYNAMIC RANGE *

    D RANGE PRIORITY *

    WHITE BALANCE *

    HIGHLIGHT TONE *

    SHADOW TONE *

    COLOR *

    SHARPNESS *

    NOISE REDUCTION *

    SELECT CUSTOM SETTING *

    AF MODE (MOVIE AF MODE)

    AF-C CUSTOM SETTINGS

    FACE/EYE DETECTION SETTING

    MF ASSIST

    TOUCH SCREEN MODE

    SELF-TIMER

    PHOTOMETRY

    SHUTTER TYPE

    FLICKER REDUCTION

    ISO *

    FLASH FUNCTION SETTING

    FLASH COMPENSATION

    MOVIE MODE

    INTERNAL/EXTERNAL MIC LEVEL ADJUSTMENT

    EVF/LCD BRIGHTNESS

    EVF/LCD COLOR

    NONE

    * Stored in custom settings bank.

    Select NONE to assign no option to the selected position.

    When SELECT CUSTOM SETTING is selected, current settings are shown in the quick menu by the label BASE.

The quick menu can also be accessed in shooting mode by holding the Q button.

FUNCTION (Fn) SETTING

Choose the roles played by the function buttons.

  1. Select DBUTTON/DIAL SETTING > FUNCTION (Fn) SETTING in the D (SET UP) tab.

  2. Highlight the desired control and press MENU/OK.

  3. Highlight any of the following options and press MENU/OK to assign it to the selected control.

    EXPO. COMP.

    IMAGE SIZE

    IMAGE QUALITY

    RAW

    FILM SIMULATION

    GRAIN EFFECT

    COLOR CHROME EFFECT

    COLOR CHROME FX BLUE

    SMOOTH SKIN EFFECT

    DYNAMIC RANGE

    D RANGE PRIORITY

    WHITE BALANCE

    SELECT CUSTOM SETTING

    FOCUS AREA

    FOCUS CHECK

    AF MODE

    AF-C CUSTOM SETTINGS

    FACE SELECT op

    FACE DETECTION ON/OFF

    SELF-TIMER

    AE BKT SETTING

    FOCUS BKT SETTING

    PHOTOMETRY

    SHUTTER TYPE

    FLICKER REDUCTION

    ISO

    IS MODE

    35mm FORMAT MODE

    WIRELESS COMMUNICATION

    FLASH FUNCTION SETTING

    TTL-LOCK

    MODELING FLASH

    ZEBRA SETTING

    INTERNAL/EXTERNAL MIC LEVEL ADJUSTMENT

    MOVIE SILENT CONTROL

    PREVIEW DEPTH OF FIELD

    PREVIEW EXP./WB IN MANUAL MODE

    NATURAL LIVE VIEW

    HISTOGRAM

    ELECTRONIC LEVEL

    LARGE INDICATORS MODE

    AE LOCK ONLY

    AF LOCK ONLY

    AE/AF LOCK

    AF-ON

    AWB LOCK ONLY

    LOCK SETTING

    PERFORMANCE

    AUTO IMAGE TRANSFER

    SELECT PAIRING DESTINATION

    Bluetooth ON/OFF

    PLAYBACK

    SHOOTING MODE

    NONE (control disabled)

AE LOCK ONLY, AF LOCK ONLY, AE/AF LOCK, AF-ON, and AWB LOCK ONLY cannot be assigned to the touch function buttons (T-Fn1 through T-Fn4).

Function button assignment options can also be accessed by holding the DISP/BACK button.

AF‑ON

If AF‑ON is selected, you can press the control instead of keeping the shutter button pressed halfway.

MODELING FLASH

If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash).

TTL-LOCK

If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for FFLASH SETTING > TTL-LOCK MODE (aTTL-LOCK MODE).

n FACE SELECT op

n FACE SELECT op can be enabled or disabled by pressing the button to which n FACE SELECT op is assigned. Enabling n FACE SELECT op allows the focus stick (focus lever) or (during viewfinder photography) touch controls (aEVF) to be used to select the face that will be used for focus.

The following features can be accessed using the focus stick or during viewfinder photography when n FACE SELECT op is enabled:

  • The face used to set focus can be selected using the focus stick. To switch from face detection to manual focus-area selection, press the center of the focus stick (focus lever) (aFocus-Point Selection). Press again to re-enable face detection.
  • The touch screen (monitor) or focus stick can be used to select the face used to set focus during viewfinder photography.

COMMAND DIAL SETTING

Choose the roles played by the command dials.

Option Description
FRONT COMMAND DIAL 1 Assign shutter speed (S.S. (PROGRAM SHIFT)) or aperture (APERTURE (PROGRAM SHIFT)* to FRONT COMMAND DIAL 1.
FRONT COMMAND DIAL 2 Assign shutter speed (S.S. (PROGRAM SHIFT)), aperture (APERTURE (PROGRAM SHIFT)*, sensitivity (ISO), or no role (NONE) to FRONT COMMAND DIAL 2 or FRONT COMMAND DIAL 3.
FRONT COMMAND DIAL 3
REAR COMMAND DIAL Assign shutter speed (S.S. (PROGRAM SHIFT)), aperture (APERTURE (PROGRAM SHIFT)*, sensitivity (ISO), or no role (NONE) to the rear command dial.
EXP. COMPENSATION ASSIGNMENT Exposure compensation can be adjusted using either or both of the front and rear command dials while the d (exposure compensation) button is pressed.

* Aperture ring rotated to C.

COMMAND DIAL SETTING can also be accessed by pressing and holding the center of the front command dial.

You can also press the center of the front command dial to cycle through settings in the order FRONT COMMAND DIAL 1, FRONT COMMAND DIAL 2, and FRONT COMMAND DIAL 3.

The selected option also applies to the vertical-grip command dials.

SHUTTER AF

Choose whether the camera focuses when the shutter button is pressed halfway.

Option Description
AF-S

ON: Focus locks when the shutter button is pressed halfway.

OFF: No focus operation is performed when the shutter button is pressed halfway.

AF-C

ON: The camera focuses while the shutter button is pressed halfway.

OFF: No focus operation is performed when the shutter button is pressed halfway.

SHUTTER AE

If ON is selected, exposure will lock while the shutter button is pressed halfway.

Option Description
AF-S/MF

ON: Exposure locks when the shutter button is pressed halfway.

OFF: Exposure does not lock when the shutter button is pressed halfway.

AF-C

ON: Exposure locks while the shutter button is pressed halfway.

OFF: Exposure does not lock when the shutter button is pressed halfway.

Select OFF to allow the camera to adjust exposure before each shot taken in burst mode.

SHOOT WITHOUT LENS

Choose ON to enable the shutter release when no lens is attached.

Options
ON OFF

SHOOT WITHOUT CARD

Choose whether the shutter can be released without a memory card inserted in the camera.

Option Description
ON When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed.
OFF The shutter is disabled if no memory card is inserted, preventing accidental loss of pictures taken without a memory card.

FOCUS RING

Choose the direction in which the focus ring is rotated to increase the focus distance.

Options
XCW (clockwise) YCCW (counterclockwise)

FOCUS RING OPERATION

Choose how the camera adjusts focus in response to the movement of the focus ring.

Option Description
NONLINEAR Focus is adjusted at the same rate as the ring is rotated.
LINEAR Focus is adjusted linearly according to the amount the ring is rotated, but the focusing speed is unaffected by the speed the ring is rotated.

AE/AF-LOCK MODE

This option determines the behavior of the button to which exposure and/or focus lock is assigned.

Option Description
AE&AF ON WHEN PRESSING Exposure and/or focus will lock while the button is pressed.
AE&AF ON/OFF SWITCH Exposure and/or focus will lock when the button is pressed and remain locked until it is pressed again.

AWB-LOCK MODE

Choose the behavior of function buttons assigned auto white balance (AWB) lock. Auto white balance lock is used to lock white balance at the value metered by the camera when AUTO is selected for white balance.

Option Description
AWB ON WHEN PRESSING Auto white balance locks while the button is pressed.
AWB ON/OFF SWITCH Press the button once to lock auto white balance and again to end the lock.

EXPO. COMP. BUTTON SETTING

Control the behavior of the rear command dial and the button to which exposure compensation is assigned. If d ON WHEN PRESSING is selected, exposure compensation can be adjusted by holding the button while rotating dial; if d ON/OFF SWITCH is selected, exposure compensation can be set by pressing the button once, rotating the dial, and then pressing the button again.

Options
ON WHEN PRESSING ON/OFF SWITCH

TOUCH SCREEN SETTING

Enable or disable touch-screen controls.

Option Description
x TOUCH SCREEN SETTING

ON: The LCD monitor functions as a touch screen during shooting.

OFF: Touch controls disabled.

x DOUBLE TAP SETTING

ON: Tap the LCD monitor twice to zoom in on your subject during shooting.

OFF: Touch zoom disabled.

c TOUCH FUNCTION Enable or disable touch function gestures.
a TOUCH SCREEN SETTING

ON: The LCD monitor functions as a touch screen during playback.

OFF: Touch controls disabled.

EVF TOUCH SCREEN AREA SETTINGS

Select the area of the LCD monitor used for touch controls while the viewfinder is active.

The area used for touch controls can be selected from:

  • 6 (all)
  • 0 (right half)
  • 2 (top right quarter)
  • 4 (bottom right quarter)
  • 1 (left half)
  • 3 (top left quarter)
  • 5 (bottom left quarter)

Choose OFF to disable touch controls while the viewfinder is active.

LOCK

Lock selected controls to prevent unintended operation.

Option Description
LOCK SETTING

Choose from the following:

UNLOCK: Reset lock options.

ALL FUNCTION: Lock all controls in the FUNCTION SELECTION list.

SELECTED FUNCTION: Lock only the controls selected in the FUNCTION SELECTION list.

FUNCTION SELECTION Choose the controls locked when SELECTED FUNCTION is chosen for LOCK SETTING.