• The Shooting Menus
• The Shooting Menus ([MOVIE SETTING])

Enter a search term and click .

Adjust movie-recording options.

---

[MOVIE MODE]

1. In the shooting menu, select B[MOVIE SETTING], then highlight [MOVIE MODE] and press [MENU]/[OK].

2. Press the focus stick (focus lever) up or down to highlight the desired frame size and aspect ratio (A) and press the stick right.

   • Choose V[16:9] or d[17:9] for 4K movies with aspect ratios of 16 or 17 to 9.
   • Choose W[16:9] or W[17:9] for Full HD movies with aspect ratios of 16 or 17 to 9.

3. Press the focus stick (focus lever) up or down to highlight a frame rate (B) and press the stick right.

   Options
   [59.94P]	[50P]	[29.97P]	[25P]	[24P]	[23.98P]

4. Press the focus stick up or down to highlight a bit rate (C) and press [MENU]/[OK].

   Options
   [200Mbps]	[100Mbps]	[50Mbps]

[FULL HD HIGH SPEED REC]

Record high-frame-rate Full HD movies. High-frame-rate movies can be played back in slow motion, giving you time to view fast-moving subjects or details too fleeting for the naked eye.

Option	Description
[2xa59.94P] F[120P]	Record Full HD footage at frame rates of 120 or 100 fps. The movies play back at 1/2, 1/4, or 1/5 speed. Maximum recording length is 6 minutes. The footage recorded to the memory card is compressed with the goal of keeping the amount of data recorded to 200 Mb per second.
[2xa50P] F[100P]
[4xa29.97P] F[120P]
[4xa25P] F[100P]
[5xa24P] F[120P]
[5xa23.98P] F[120P]
[OFF]	High-speed recording off.

F[FILM SIMULATION]

Choose a film simulation effect for movie recording.

Option	Description
c [PROVIA/ STANDARD]	See “[FILM SIMULATION]”.
d[Velvia/VIVID]
e[ASTIA/ SOFT]
i[CLASSIC CHROME]
g[PRO Neg. Hi]
h[PRO Neg. Std]
X[ETERNA/CINEMA]
a[ACROS]
b[MONOCHROME]
f[SEPIA]

F[B & W ADJ.ab (Warm/Cool)]

Add a reddish or bluish tinge (warm or cool color cast) to monochrome pictures taken with the a[ACROS] or b[MONOCHROME] film simulation.

Option	Description
[+9] — [+1]	Higher positive values equate to a redder color cast.
[0]	Normal monochrome (grayscale).
[-1] — [-9]	Lower negative values equate to a bluer color cast.

F[WHITE BALANCE]

Adjust white balance for movie recording.

Option	Description
[AUTO]	See “[WHITE BALANCE]”.
k/l/m
k
i
j
k
l
m
n
g

F[DYNAMIC RANGE]

Choose a dynamic range for movie recording.

Option	Description
V[100％]	See “[DYNAMIC RANGE]”.
W[200％]
X[400％]

F[HIGHLIGHT TONE]

Choose how the camera records highlights when shooting movies.

F[SHADOW TONE]

Choose how the camera records shadows when shooting movies.

F[COLOR]

Adjust color density for movie recording.

F[SHARPNESS]

Sharpen or soften outlines in movies.

F[NOISE REDUCTION]

Reduce noise in movies shot at high sensitivities.

V[INTERFRAME NR]

Select [ON] to enable interframe noise reduction.

[F-Log RECORDING]

Select [ON] to record movies using a soft gamma curve with a wide gamut suitable for further processing post-production. Sensitivity is restricted to values between ISO 640 and 12800.

Options
[ON]	[OFF]

F[PERIPHERAL LIGHT CORRECTION]

Select [ON] to enable peripheral illumination correction during movie recording.

Options
[ON]	[OFF]

F[FOCUS AREA]

Choose the focus area for movies shot using autofocus. You can also choose the focus area (and consequently also the focus zoom position) for movies shot using manual focus.

[MOVIE AF MODE]

Choose how the camera selects the focus point for movie recording.

Option	Description
[MULTI]	Automatic focus-point selection.
[AREA]	The camera focuses on the subject in the selected focus area.

F[AF-C CUSTOM SETTING]

Select focus-tracking options when recording movies in focus mode [C].

[TRACKING SENSITIVITY]

Choose how long the camera waits to switch focus when an object enters the focus area behind or in front of the current subject. See “[TRACKING SENSITIVITY]”.

[AF SPEED]

Adjust the autofocus response speed.

F[FACE/EYE DETECTION SETTING]

Enable or disable Intelligent Face Detection when recording movies.

Option	Description
[FACE DETECTION ON]	See “[FACE/EYE DETECTION SETTING]”.
[OFF]	Intelligent Face Detection and eye priority off.

F[MF ASSIST]

Choose how focus is displayed in manual focus mode.

Option	Description
[STANDARD]	Focus is displayed normally (focus peaking is not available).
[FOCUS PEAK HIGHLIGHT]	The camera heightens high-contrast outlines. Choose a color and peaking level.

F[FOCUS CHECK]

If [ON] is selected, the display will automatically zoom in on the selected focus area when the focus ring is rotated in manual focus mode.

Options
[ON]	[OFF]

[HDMI OUTPUT INFO DISPLAY]

If [ON] is selected, HDMI devices to which the camera is connected will mirror the information in the camera display.

Options
[ON]	[OFF]

[4K MOVIE OUTPUT]

Choose the destination for 4K movies shot while the camera is connected to an HDMI recorder or other device that supports 4K.

Option	Description
b[4K] Y[4K]	4K movies are recorded to the camera memory card and output to the HDMI device in 4K.
b[4K] Y[FHD]	4K movies are recorded to a camera memory card in 4K and output to the HDMI device in Full HD.
b[FHD] Y[4K]	4K movies are output to the HDMI device in 4K and recorded to the camera memory card in Full HD.
b― Y[4K]	4K movies are output to the HDMI device in 4K. The camera does not record 4K movies to a memory card.

[FULL HD MOVIE OUTPUT]

Choose the destination for Full HD movies shot while the camera is connected to an HDMI device.

Option	Description
b[FHD] Y[FHD]	Full HD movies are output to the HDMI device and recorded to the camera memory card.
b― Y[FHD]	Full HD movies are not recorded to the camera memory card but are output to the HDMI device.

[4K HDMI STANDBY QUALITY]

Choose whether output to connected HDMI devices switches from 4K to Full HD during standby.

Option	Description
V	Output to HDMI devices continues at 4K during standby.
W	Output to HDMI devices switches to Full HD during standby, reducing the drain on the battery.

[HDMI REC CONTROL]

Choose whether the camera sends movie start and stop signals to the HDMI device when the shutter button is pressed to start and stop movie recording.

Options
[ON]	[OFF]

[ZEBRA SETTING]

Highlights that may be overexposed are shown by zebra stripes in the movie mode display.

Option	Description
[ZEBRA RIGHT]	Right-slanting stripes.
[ZEBRA LEFT]	Left-slanting stripes.
[OFF]	Stripes off.

[ZEBRA LEVEL]

Choose the brightness threshold for the zebra stripe display.

[AUDIO SETTING]

Adjust audio-related settings for movie recording.

[INTERNAL MIC LEVEL ADJUSTMENT]

Adjust the recording level for the built-in microphone.

Option	Description
[AUTO]	The camera adjusts the recording level automatically.
[MANUAL]	Adjust the recording level manually. Press the focus stick (focus lever) right to choose from 25 recording levels.
[OFF]	Turn the built-in microphone off.

[EXTERNAL MIC LEVEL ADJUSTMENT]

Adjust the recording level for external microphones.

Option	Description
[AUTO]	The camera adjusts the recording level automatically.
[MANUAL]	Adjust the recording level manually. Press the focus stick (focus lever) right to choose from 25 recording levels.
[OFF]	Disable recording using external microphones.

[MIC LEVEL LIMITER]

Reduces distortion caused by input that exceeds the limits of the microphone’s audio circuits.

Options
[ON]	[OFF]

[WIND FILTER]

Choose whether to enable wind noise reduction during movie recording.

Options
[ON]	[OFF]

[LOW CUT FILTER]

Choose whether to enable the low-cut filter, reducing low-frequency noise during movie recording.

Options
[ON]	[OFF]

[HEADPHONES VOLUME]

Adjust the headphone volume.

Option	Description
[10]—[1]	Choose a volume of from 1 to 10.
[0]	Mute output to the headphones.

[MIC/REMOTE RELEASE]

Specify whether the device connected to the microphone/remote release connector is a microphone or a remote release.

Options
m [MIC]	n [REMOTE]

[TIME CODE SETTING]

Adjust time code (hour, minute, second, and frame number) display settings for movie recording.

[TIME CODE DISPLAY]

Select [ON] to display time codes during movie recording and playback.

Options
[ON]	[OFF]

[START TIME SETTING]

Choose the time code starting time.

Option	Description
[MANUAL INPUT]	Highlight this option and press the focus stick (focus lever) right to choose a start time manually.
[CURRENT TIME]	Set the start time to the current time.
[RESET]	Set the start time to 00:00:00.

[COUNT UP SETTING]

Choose whether time is clocked continuously or only during movie recording.

Option	Description
[REC RUN]	Time is clocked only during movie recording.
[FREE RUN]	Time is clocked continuously.

[DROP FRAME]

At frame rates of [59.94P], and [29.97P], a discrepancy will gradually develop between the time code (measured in seconds) and the actual recording time (measured in fractions of a second). Choose whether the camera drops frames as necessary to match the recording time to the time code.

Option	Description
[ON]	The camera drops frames as necessary to maintain a strict match between the time code and the actual recording time.
[OFF]	Frames are not dropped.

[HDMI TIME CODE OUTPUT]

Choose whether time codes are output to HDMI devices.

Options
[ON]	[OFF]

[TALLY LIGHT]

Choose the lamp (indicator or AF-assist) that lights during movie recording and whether the lamp blinks or remains steady.

Option	Description
[FRONT OFF] [REAR]z	The indicator lamp lights during movie recording.
[FRONT OFF] [REAR]y	The indicator lamp blinks during movie recording.
[FRONT]z [REAR]z	The indicator and AF-assist lamps light during movie recording.
[FRONT]z [REAR OFF]	The AF-assist lamp lights during movie recording.
[FRONT]y [REAR]y	The indicator and AF-assist lamps blink during movie recording.
[FRONT]y [REAR OFF]	The AF-assist lamp blinks during movie recording.
[FRONT OFF] [REAR OFF]	The indicator and AF-assist lamps remain off during movie recording.

[MOVIE SILENT CONTROL]

Select [ON] to disable camera dials and adjust movie settings using touch-screen controls, preventing the sounds made by camera controls being recorded with the movie (aMuting Movie Controls).

Options
[ON]	[OFF]