Enter a search term and click .

Take pictures using autofocus.

  1. Use G[AF/MF SETTING] > [FOCUS MODE] to choose [SINGLE AF] or [CONTINUOUS AF] (aFocus Mode).

  2. Use G[AF/MF SETTING] > [AF MODE] to choose an AF mode (aAutofocus Options (AF Mode)).

  3. Select G[AF/MF SETTING] > [FOCUS AREA] and choose the position and size of the focus frame (aFocus-Point Selection).

  4. Take pictures.


Focus Mode

Choose how the camera focuses.

  1. Press [MENU/OK] to display the menus.

  2. Select G[AF/MF SETTING] > [FOCUS MODE] in the shooting menu.

  3. Choose from the following options:

    Mode Description

    p

    [MANUAL FOCUS]

    Focus manually using the lens focus ring. Choose for manual control of focus or in situations in which the camera is unable to focus using autofocus (aManual Focus).

    k

    [CONTINUOUS AF]

    Focus is continually adjusted to reflect changes in the distance to the subject while the shutter button is pressed halfway. Use for subjects that are in motion.

    l

    [SINGLE AF]

    Focus locks while the shutter button is pressed halfway. Choose for stationary subjects.

Regardless of the option selected, manual focus will be used when the lens is in manual focus mode.

If [ON] is selected for G[AF/MF SETTING] > [PRE-AF], focus will be adjusted continuously in modes l and k even when the shutter button is not pressed.

The Focus Indicator

Focus status is shown by the focus indicator.

Focus indicator

Focus indicator Focus status
( ) Camera focusing.

z
(lights green)

Subject in focus; focus locked (focus mode l).

(z)
(lights green)

Subject in focus (focus mode k). Focus is automatically adjusted for changes in distance to subject.

A
(blinks white)

Camera unable to focus.
j Manual focus (focus mode p).

Autofocus Options (AF Mode)

Choose how the camera focuses in modes l and k.

  1. Press [MENU/OK] and go to the shooting menu.

  2. Select G[AF/MF SETTING] > [AF MODE].

  3. Choose an AF mode.

How the camera focuses depends on the focus mode.

Focus Mode l ([SINGLE AF])

Option Description Sample image

r

[SINGLE POINT]

Camera focuses on subject in selected focus point. Use for pin-point focus on selected subject.

y

[ZONE]

Camera focuses on subject in selected focus zone. Focus zones include multiple focus points, making it easier to focus on subjects in motion.

z

[WIDE]

Camera focuses automatically on high-contrast subjects; display shows areas in focus.

j

[ALL]

Rotate the front command dial in the focus-point selection display (aSelecting a Focus Point, aThe Focus-Point Display) to cycle through AF modes in the following order: r[SINGLE POINT], y[ZONE], and z[WIDE].

Focus Mode k ([CONTINUOUS AF])

Option Description Sample image

r

[SINGLE POINT]

Focus tracks subject at selected focus point. Use for subjects moving toward or away from camera.

y

[ZONE]

Focus tracks subject in selected focus zone. Use for subjects that are moving fairly predictably.

z

[TRACKING]

Focus tracks subjects moving through wide area of frame.

j

[ALL]

Rotate the front command dial in the focus-point selection display (aSelecting a Focus Point, aThe Focus-Point Display) to cycle through AF modes in the following order: r[SINGLE POINT], y[ZONE], and z[TRACKING].

Focus-Point Selection

Choose a focus point for autofocus.

Viewing the Focus-Point Display

  1. Press [MENU/OK] and go to the shooting menu.

  2. Select G[AF/MF SETTING] > [FOCUS AREA] to view the focus-point display.

  3. Use the focus stick (focus lever) and front command dial to choose a focus area.

The focus point can also be selected using touch controls (aShooting Touch Controls).

Selecting a Focus Point

Use the focus stick (focus lever) to choose the focus point and the front command dial to choose the size of the focus frame. The procedure varies with the option selected for AF mode.

AF mode Focus stick

Tilt

Press

r Highlight focus point Select highlighted focus point
y
z

AF mode Front command dial

Rotate

r Choose from 6 frame sizes
y Choose from 3 frame sizes
z
AF mode [DISP/BACK] button

Press

r Select center focus point
y
z

Manual focus-point selection is not available when z[WIDE/TRACKING] is selected in focus mode l.

If j[ALL] is selected for AF mode, you can rotate the front command dial in the focus-point selection display to cycle through AF modes in the following order: r[SINGLE POINT] (6 frame sizes), y[ZONE] (3 frame sizes), and either z[WIDE] (focus mode l) or z[TRACKING] (focus mode k).

The Focus-Point Display

The focus-point display varies with the option selected for AF mode.

Focus frames are shown by small squares (□), focus zones by the large squares.

r[SINGLE POINT]

Number of points available can be selected using G[AF/MF SETTING] > [NUMBER OF FOCUS POINTS].

y[ZONE]

Choose from zones with 7 × 7, 5 × 5, or 3 × 3 focus points.

z[TRACKING]

Position focus frame over subject you want to track.

Autofocus

Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed below.

  • Very shiny subjects such as mirrors or car bodies.
  • Subjects photographed through a window or other reflective object.
  • Dark subjects and subjects that absorb rather than reflect light, such as hair or fur.
  • Insubstantial subjects, such as smoke or flame.
  • Subjects that show little contrast with the background.
  • Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a subject photographed against a backdrop of highly contrasting elements).

Checking Focus

To zoom the current focus area in by a factor of 6 for precise focus, press the center of the focus stick (focus lever). Press again to cancel zoom.

Normal display

Focus zoom

In focus mode l, select [SINGLE POINT] for [AF MODE].

Focus zoom is not available in focus mode k or when G[AF/MF SETTING] > [PRE-AF] is on.

Use D[BUTTON/DIAL SETTING] > [FOCUS LEVER SETTING] to change the function performed by the center of the focus stick (focus lever) (a[FOCUS LEVER SETTING]). D[BUTTON/DIAL SETTING] > [FUNCTION (Fn) SETTING] can also be used to assign focus zoom to other controls (aFunction Controls).