Automatically vary settings over a series of pictures.
Press the selector down (I) to display bracketing options.
Press the selector up or down to highlight one of the following:
|X[FILM SIMULATION BKT]|
|V[WHITE BALANCE BKT]|
|Y[DYNAMIC RANGE BKT]|
Press the selector left or right to highlight the desired bracketing settings and press [MENU/OK] to select the highlighted option.
Bracketing settings for AE and film simulation bracketing are selected using the S[AE BKT SETTING] and X[FILM SIMULATION BKT] options in the shooting menu.
Use S[AE BKT SETTING] to choose the bracketing amount and number of shots. Each time the shutter button is pressed, the camera will take the specified number of shots: one using the metered value for exposure and the others over- or under-exposed by multiples of the selected bracketing amount (a AE BKT SETTING).
Regardless of the bracketing amount, exposure will not exceed the limits of the exposure metering system.
Select a bracketing amount (±1, ±2/3, or ±1/3). Each time the shutter is released, the camera will take a picture at the current sensitivity and process it to create two additional copies, one with sensitivity raised and the other with sensitivity lowered by the selected amount.
Each time the shutter is released, the camera takes one shot and processes it to create a total of three copies with different film simulation settings, chosen using the X[FILM SIMULATION BKT] option in the shooting menu (a FILM SIMULATION BKT).
Select a bracketing amount (±1, ±2, or ±3). Each time the shutter is released, the camera takes one shot and processes it to create three copies: one at the current white balanced setting, one with fine-tuning increased by the selected amount, and another with fine-tuning decreased by the selected amount.
Each time the shutter button is pressed, the camera takes three shots with different dynamic ranges: 100% for the first, 200% for the second, and 400% for the third.
While dynamic range bracketing is in effect, sensitivity will be restricted to a minimum of ISO 800 (or to a minimum of ISO 200 to 800 when an auto option is selected for sensitivity); the sensitivity previously in effect is restored when bracketing ends.
Each time the shutter button is pressed, the camera takes multiple shots at different exposures and combines them into a single high–dynamic-range image, reducing loss of detail in highlights and shadows. Choose the amount the camera varies exposure from [AUTO], [1.0 EV], [1.5 EV], [2.0 EV], [2.5 EV], and [3.0 EV].
Keep the camera steady. If the camera is moved or the subject changes during shooting, the shots may be recorded separately instead of being combined into a single image. The camera may fail to record an image if the subject moves during shooting.
The camera displays the combined image after shooting. Press [MENU/OK] to save the image or [DISP/BACK] to end HDR shooting without recording the image.