Enter a search term and click .

Assign a role to the function buttons for quick access to the selected feature.


The functions assigned to [T-Fn1] through [T-Fn4] can be accessed by flicking the monitor.

The default assignments are:

[Fn1] button
Sensitivity
[Fn2] button
Front command dial switch
[Fn3] button
Exposure lock
[Fn4] button
Focus lock
[Fn5] button
AF mode
Drive button
Drive button
[T-Fn1] (flick up)
Histogram
[T-Fn2] (flick left)
Film simulation
[T-Fn3] (flick right)
White balance
[T-Fn4] (flick down)
Electronic level
Center of rear command dial
Focus check

Assigning Roles to the Function Buttons

To assign roles to the buttons:

  1. Press and hold the [DISP]/[BACK] button until a control selection menu is displayed.

  2. Highlight a control and press [MENU]/[OK].

  3. Highlight the desired role and press [MENU]/[OK] to assign it to the selected control. Choose from:

    [IMAGE SIZE]

    [IMAGE QUALITY]

    [RAW]

    [FILM SIMULATION]

    [GRAIN EFFECT]

    [COLOR CHROME EFFECT]

    [DYNAMIC RANGE]

    [WHITE BALANCE]

    [SELECT CUSTOM SETTING]

    [FOCUS AREA]

    [FOCUS CHECK]

    [AF MODE]

    [RAPID AF]

    [FACE/EYE DETECTION SETTING]

    [DRIVE BUTTON]

    [SELF-TIMER]

    [AE BKT SETTING]

    [FOCUS BKT SETTING]

    [PHOTOMETRY]

    [SHUTTER TYPE]

    [FLICKER REDUCTION]

    [ISO]

    [35mm FORMAT MODE]

    [WIRELESS COMMUNICATION]

    [FLASH FUNCTION SETTING]

    [TTL-LOCK]

    [MODELING FLASH]

    [MIC LEVEL ADJUSTMENT]

    [PREVIEW DEPTH OF FIELD]

    [PREVIEW EXP./WB IN MANUAL MODE]

    [NATURAL LIVE VIEW]

    [HISTOGRAM]

    [ELECTRONIC LEVEL]

    [LARGE INDICATORS MODE]

    [FRONT COMMAND DIAL SWITCH]

    [AE LOCK ONLY]

    [AF LOCK ONLY]

    [AE/AF LOCK]

    [AF-ON]

    [LOCK SETTING]

    [AUTO IMAGE TRANSFER]

    [SELECT PAIRING DESTINATION]

    [Bluetooth ON/OFF]

    [PLAYBACK]

    [NONE] (control disabled)

[AE LOCK ONLY], [AF LOCK ONLY], [AE/AF LOCK], and [AF-ON] cannot be assigned to the touch function buttons ([T-Fn1] through [T-Fn4]).

Button assignments can also be selected using D[BUTTON/DIAL SETTING] > [FUNCTION (Fn) SETTING].

[AF‑ON]

If [AF‑ON] is selected, you can press the control instead of keeping the shutter button pressed halfway.

[MODELING FLASH]

If [MODELING FLASH] is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash).

[TTL-LOCK]

If [TTL-LOCK] is selected, you can press the control to lock flash output according to the option selected for F[FLASH SETTING] > [TTL-LOCK MODE] (a[TTL-LOCK MODE]).