DThe Setup Menus ([POWER MANAGEMENT])
Adjust power management settings.
To access power management settings, press [MENU]/[OK], select the D ([SET UP]) tab, and choose [POWER MANAGEMENT].
[AUTO POWER OFF]
Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if [OFF] is selected, the camera must be turned off manually.
|[5 MIN]||[2 MIN]||[1 MIN]||[30 SEC]||[15 SEC]||[OFF]|
[SHOOTING STAND BY MODE]
Choose the delay before the camera enters shooting standby mode.
|[5 MIN]||The camera will suspend all functions and enter powering-saving (standby) mode if no operations are performed for the selected period.|
|[OFF]||Shooting standby mode disabled.|
[AUTO POWER SAVE]
If [ON] is selected, the display frame rate will drop to save power if no operations are performed for a short period, but the normal frame rate can be restored by operating camera controls.