Enter a search term and click .

Automatically vary settings over a series of pictures.

  1. Rotate the [DRIVE] mode dial to [MULTI].

  2. Press the [DRIVE] button to display drive mode options.

  3. Highlight the desired bracketing option using the focus stick and press [MENU]/[OK].

  4. Take photographs.

O[AE BKT]

Use A[SHOOTING SETTING] > [AE BKT SETTING] to choose the bracketing amount, bracketing order, and number of shots. Each time the shutter button is pressed, the camera will take the specified number of shots: one using the metered value for exposure and the others over- or under-exposed by multiples of the selected bracketing amount.

Regardless of the bracketing amount, exposure will not exceed the limits of the exposure metering system.

W[ISO BKT]

Select a bracketing amount (±1/3, ±2/3, or ±1) in the drive mode display. Each time the shutter is released, the camera will take a picture at the current sensitivity and process it to create two additional copies, one with sensitivity raised and the other with sensitivity lowered by the selected amount.

X[FILM SIMULATION BKT]

Each time the shutter is released, the camera takes one shot and processes it to create copies with different film simulation settings, chosen using A[SHOOTING SETTING] > [FILM SIMULATION BKT].

V[WHITE BALANCE BKT]

Select a bracketing amount (±1, ±2, or ±3) in the drive mode display. Each time the shutter is released, the camera takes one shot and processes it to create three copies: one at the current white balanced setting, one with fine-tuning increased by the selected amount, and another with fine-tuning decreased by the selected amount.

Y[DYNAMIC RANGE BKT]

Each time the shutter button is pressed, the camera takes three shots with different dynamic ranges: 100% for the first, 200% for the second, and 400% for the third.

While dynamic range bracketing is in effect, sensitivity will be restricted to a minimum of ISO 400; the sensitivity previously in effect is restored when bracketing ends.

Z[FOCUS BKT]

Each time the shutter button is pressed, the camera takes a series of photos, varying focus with each shot. The number of shots, the amount focus changes with each shot, and the interval between shots can be selected using A[SHOOTING SETTING] > [FOCUS BKT].